Keep up to date and contact us
Here at Stab Wood Mods we stock three of the best stabilized wood mods from Asmodus: Asmodus Ohmsmium II, Asmodus Spruzza and Ultroner EOS 2.
Asmodus ohmsmium ii
Asmodus' latest reincarnation of the Ohmsmium is a true departure from the original. The Ohmsmium II is still a single 18650 but now it's mechanical rather than regulated.
The featured chipset on the Ohmsmium II is the GX-80-UL. This chipset allows for an unregulated experience, that also has a plethora of safety features.
The elegant body was machined from a Stabilized wood block that is contoured with precise machining to fit into your hand perfectly. The body has been treated with a clear coat to help protect from moisture and temperature. The clear coat also reduces any potential chance of cracking or warping. The Ohmsmium II is operated by a single oversized firing button that provides tactile feedback.
The Ohmsmium II's safety features are similar in many ways to the Luna and Pumper Squonker mods. There is an LED light within the Ohmsmium II to indicate if there are any issues (located below the fire button).The chip protects the user from these issues:
Negative Polarity; the LED will flash green when you install the battery correctly, the LED will not flash if installed incorrectly.
When the user’s battery hits 3.3v the mod will shut off, protecting the mod, battery health and most importantly, the user; the LED will flash RED five times indicating your battery is at 3.3v.
The mod will automatically shut off when firing the mod for over 10 seconds to prevent any auto-firing moments.
The LED will flash red if the Ohmsmium II detects a short in the user’s atomizer.
When the mod reaches over 85 degrees it will shut off automatically to prevent any accidents.
Dimensions L 55mm x W 40mm x H 90mm. Fits up to 25.5mm atomizer with no overhang.
Atomizer resistance range:0.1-3.0 ohms
Asmodus x ultroner eos 2
Asmodus X Ultroner EOS 2 is the latest mod to be released by the collaborative efforts of Asmodus and Ultroner.
Packing two 18650 batteries (not included) in to a very compact and ergonomic stab wood and aluminium frame that is capable of fitting up to a 26mm atomizer.
The Asmodus GX180-UTC chip powers the EOS 2 and will punch out 180 watts of power and features a touch screen control panel.
A full colour display enhances the look of the stab wood mod. All of the usual features are present in temperature control mode and there is a soft, medium and hard mode in wattage configuration.
This Ultroner version comes as a kit and has a zip up protective case, polishing cloth, protective bag, polishing sticks, Lava sub ohm tank, two coils and full instructions.
The 510 is made from stainless steel and will fit a 26mm atomizer.
The pressure lock battery door is fitted at the base of the mod and will house your two 18650 batteries.
Dimensions L58mm W 26mm H87mm
Asmodus Spruzza
The Asmodus Spruzza is a squonking mod with a difference. The difference is the SSS (Smart Siphon System) which means that all you need to do is pump the lever and the perfect amount of juice is fed into the Fonte atomiser. The reservoir holds 6ml of juice and is very easy to fill in situ. An aluminium chassis houses two removable stab wood inlaid doors (here at Stab Wood Mods we have hand polished, oiled and waxed the doors to give extra depth of colour, shine and protection) and the kit comes complete with the Fonte RDA which is focused on flavour. It's a two post deck making it very easy to build on and the air intakes are angled downwards to simulate bottom air flow without the risks of leaking. Powered by a single 18650 battery (not included), it runs on the new GX-80-HUT chip allowing you all of the features that you find in a high end device. Power/ wattage mode, temperature control mode (Ni200, SS316, SS317, SS304, Ti, TCR (Temperature Coefficient of Resistance), TFR (Temperature Factors of Resistance) and curve (adjust five different points with wattage to mimic temperature control) ). Wattage range (Power mode): 5W - 80W Wattage range (TC modes): 5W - 60W, Juice Capacity 6ml, Easy fill tank, Easy to clean, Touch and swipe technology, Conical top cap, Wide bore drip tip, Directional airflow, SSS pre-primed with VG. Dimensions L 55m W 28mm H 83mm
Unit 25 Knightsbridge Business Centre, Knightsbridge, Cheltenham, Gloucestershire GL51 9TA, UK TEL +44 (0) 1242681034
Free Shipping on all Mainland UK Orders We ship worldwide Copyright © All Rights Reserved.
|
|
|
|
|
|||